VERSEF32 Self amalgamating tape made from EPR rubber,3/4” X 30’ 30mil, dielectric strength up to 35KV/mm
Model: VERSAF 32
VERSAF 32 Self Amalgamating Tape
VERSAF 32 Self Amalgamating Tape
Characteristic description
●Ideal for cable joint and termination splices in high voltage circuits
●Made from ERP rubber and suitable for irregular surface
●Dielectric strength up to 35KV/mm, and meet up to 69KV circuits
●Wide width range from 0.76in to 2in to meet most conductor surface
General Information
VERSAF32 high voltage rubber self amalgamating tape is made from
EPR (Ethylene Propylene Rubber). Non-vulcanized, storage-resistant, excellent electrical performance electrical splicing tape, widely used in cable terminals and cable termination, for splicing, insulation and protection, can be used up to 69KV circuit.
Specification
| Properties | Typical Value |
|---|---|
| Brand | Maxwel |
| Tensile Strength | 1.8Mpa |
| Elongation at break | 800% |
| Temperature | 90℃ |
| Emergency overload Temperature | 130℃ |
| Dielectric Strength | 32.5KV/mm |
| Insulation Resistance | ＞1x106MΩ |
| Ozone and Aging Resistance | Pass |
Regulatory Compliance | Certifications
| RoHs | Compliant |
|---|---|
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |