Heat Shrink Tube, yellow-green, Shrink Ratio 2:1, meet Rohs standard
Model: SM0225-YG
Heat Shrink Tube, yellow-green, Shrink Ratio 2:1, meet Rohs standard
Model: SM0225-YG
●Shrink Ratio: 2:1
●Soft, Good Flame Retardant, Environmentally Friendly, meet Rohs standard
●Initial/Full shrinking temp: ≥ 70 ℃ / ≥ 125 ℃
●Operating Temp: -55 to 125 ℃
●Standard Color: Yellow-Green
Yellow-green heat shrinkable tube is made from environmental polyolefin material, processed by Two-color coextrusion and irradiation. It has the characteristics of soft, good flame retardant, bright and lasting color and stable performance, which is widely used in the marking of electric wires, earthing of cables, special lines and pipeline.
Specification | Inner Diameter (mm) | Inner diameter after fully shrinked (mm) | Wall thickness after fully shrinked (mm) | Packing (M/Roll) | Applicable Range (mm) |
---|---|---|---|---|---|
φ 1.0 | 1.5 ± 0.3 | ≤ 0.7 | 0.28 ± 0.10 | 200 | 0.75 ~ 0.90 |
φ 1.5 | 2.0 ± 0.3 | ≤ 0.9 | 0.30 ± 0.10 | 200 | 0.95 ~ 1.40 |
φ 2.0 | 2.5 ± 0.3 | ≤ 1.0 | 0.35 ± 0.10 | 200 | 1.10 ~ 1.80 |
φ 2.5 | 3.0 ± 0.3 | ≤ 1.3 | 0.36 ± 0.10 | 200 | 1.35 ~ 2.30 |
φ 3.0 | 3.5 ± 0.4 | ≤ 1.5 | 0.38 ± 0.10 | 200 | 1.60 ~ 2.70 |
φ 3.5 | 4.0 ± 0.4 | ≤ 1.8 | 0.40 ± 0.10 | 200 | 1.85~ 3.20 |
φ 4.0 | 4.5 ± 0.4 | ≤ 2.0 | 0.45 ± 0.10 | 200 | 2.10 ~ 3.60 |
φ 4.5 | 5.0 ± 0.4 | ≤ 2.3 | 0.45 ± 0.10 | 100 | 2.35 ~ 4.00 |
φ 5.0 | 5.5 ± 0.4 | ≤ 2.5 | 0.45 ± 0.10 | 100 | 2.60 ~ 4.50 |
φ 6.0 | 6.5 ± 0.4 | ≤ 3.0 | 0.50 ± 0.10 | 100 | 3.10 ~ 5.40 |
φ 7.0 | 7.5 ± 0.4 | ≤ 3.5 | 0.50 ± 0.10 | 100 | 3.70 ~ 6.30 |
φ 8.0 | 8.5 ± 0.5 | ≤ 4.0 | 0.55 ± 0.10 | 100 | 4.20 ~7.20 |
φ 9.0 | 9.5 ± 0.5 | ≤ 4.5 | 0.55 ± 0.10 | 100 | 4.70 ~ 8.00 |
φ 10.0 | 10.5 ± 0.5 | ≤ 5.0 | 0.55 ± 0.10 | 100 | 5.20 ~ 9.00 |
φ 11.0 | 11.5 ± 0.5 | ≤ 5.5 | 0.60 ± 0.10 | 100 | 5.70 ~ 10.0 |
Φ12.0 | 12.5±0.5 | ≤6.0 | 0.60±0.10 | 100 | 6.20 ~ 11.0 |
Φ13.0 | 13.5±0.5 | ≤6.5 | 0.60±0.10 | 100 | 6.70 ~ 12.0 |
Φ14.0 | 14.5±0.5 | ≤7.0 | 0.65±0.10 | 100 | 7.30 ~ 13.0 |
Φ15.0 | 15.5±0.6 | ≤7.5 | 0.70±0.10 | 100 | 7.80 ~ 14.0 |
Φ16.0 | 17.0±0.6 | ≤8.0 | 0.70±0.10 | 100 | 8.30 ~ 15.0 |
Φ17.0 | 17.5±0.6 | ≤8.5 | 0.70±0.10 | 100 | 8.30 ~ 16.0 |
Φ18.0 | 19.0±0.7 | ≤9.0 | 0.70±0.15 | 100 | 9.30 ~ 17.0 |
Φ20.0 | 22.0±0.7 | ≤10.0 | 0.75±0.15 | 100 | 10.4 ~ 19.0 |
Φ22.0 | 24.0±0.7 | ≤11.0 | 0.80±0.15 | 100 | 11.4 ~ 21.0 |
Φ25.0 | 26.0±0.7 | ≤12.5 | 0.90±0.15 | 50 | 12.8 ~ 24.0 |
Φ28.0 | 29.0±0.7 | ≤14.0 | 0.90±0.15 | 50 | 14.4 ~ 29.0 |
Φ30.0 | 31.5±0.7 | ≤15.0 | 0.95±0.15 | 50 | 16.0 ~ 29.0 |
Φ35.0 | 36.5±0.7 | ≤17.5 | 0.95±0.15 | 50 | 18.0 ~ 34.0 |
Φ40.0 | 41.5±0.7 | ≤20.0 | 1.00±0.20 | 50 | 21.0 ~ 39.0 |
Φ45.0 | 46.0±0.7 | ≤22.5 | 1.00±0.20 | 25 | 23.0 ~ 44.0 |
Φ50.0 | 51.0±0.7 | ≤25.0 | 1.00±0.20 | 25 | 26.0 ~ 49.0 |
Φ60.0 | ≥60.0 | ≤30.0 | 1.10±0.20 | 25 | 35.0 ~ 55.0 |
Φ70.0 | ≥70.0 | ≤35.0 | 1.20±0.20 | 25 | 40.0 ~ 65.0 |
Φ80.0 | ≥80.0 | ≤40.0 | 1.30±0.20 | 25 | 45.0 ~ 75.0 |
Φ90.0 | ≥90.0 | ≤45.0 | 1.50±0.20 | 25 | 50.0 ~ 88.0 |
Φ100 | ≥100 | ≤50.0 | 1.65±0.20 | 25 | 55.0 ~ 95.0 |
Φ120 | ≥120 | ≤60.0 | 1.70±0.20 | 15 | 65.0 ~ 115 |
Φ150 | ≥150 | ≤75.0 | 1.70±0.20 | 15 | 80.0 ~ 145 |
Φ180 | ≥180 | ≤90.0 | 1.75±0.20 | 15 | 95.0 ~ 175 |
RoHs | Compliant |
---|---|
ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |