Heat Shrink Tube, High temp resistance up to 150℃, Flame Retardant, Shrink Ratio 2:1, meet Rohs standard
Model: SM0250
SM0250 High Temperature Resistant Heat Shrink Tube
Characteristic Description
●Standards: AMS-DTL-23053/5 and UL 224, CAN/CSA C22. 2 N0198. 1-99
●Shrink Ratio: 2:1
●Low smoke, soft, Good flame retardant
●Initial/Full shrinking temp: ≥ 84 ℃ / ≥ 120 ℃
●Operating Temp: -55 to 150 ℃
●Standard Color: Black, White, Red, Yellow, Green and Blue
General Information
150°C High Temperature Resistant Flame-Retardant Heat Shrink Tube is composed of radiation-cross linked polyolefin material, which has excellent physical and chemical properties. The main function is electrical insulation of joints in high temperature places, anti-rust and anti-corrosion of solder joints, mechanical protection and wire harness. They are widely used in the fields of electronics, communications, automobiles, ships and aircraft manufacturing.
Specification
| Specification (inch) | Specification (mm) | Inner diameter (mm) | Inner Diameter After Fully Shrinked (mm) | Wall Thickness After Fully Shrinked (mm) | Standard Packing M/Roll |
|---|---|---|---|---|---|
| Φ 0.6/0.35 | ≥ 0.90 | ≤ 0.35 | ≥ 0.33 | 200 | |
| 3/64 | Φ 0.8/0.40 | ≥ 1.00 | ≤ 0.40 | ≥ 0.33 | 200 |
| 1/16 | Φ 1.0/0.65 | ≥ 1.60 | ≤ 0.65 | ≥ 0.33 | 200 |
| Φ 1.5/0.85 | ≥ 2.00 | ≤ 0.85 | ≥ 0.36 | 200 | |
| 3/32 | Φ 2.0/1.00 | ≥ 2.50 | ≤ 1.00 | ≥ 0.44 | 200 |
| Φ 2.5/1.25 | ≥ 3.00 | ≤ 1.25 | ≥ 0.44 | 200 | |
| 1/8 | Φ 3.0/1.50 | ≥ 3.50 | ≤ 1.50 | ≥ 0.44 | 200 |
| Φ 3.5/1.75 | ≥ 4.00 | ≤ 1.75 | ≥ 0.44 | 200 | |
| Φ 4.0/2.00 | ≥ 4.50 | ≤ 2.00 | ≥ 0.44 | 200 | |
| Φ 4.5/2.25 | ≥ 4.80 | ≤ 2.25 | ≥ 0.44 | 100 | |
| Φ 5.0/2.50 | ≥ 5.30 | ≤ 2.50 | ≥ 0.56 | 100 | |
| Φ 6.0/3.00 | ≥ 6.40 | ≤ 3.00 | ≥ 0.56 | 100 | |
| Φ 7.0/3.50 | ≥ 7.40 | ≤ 3.50 | ≥ 0.56 | 100 | |
| Φ 8.0/4.00 | ≥ 8.40 | ≤ 4.00 | ≥ 0.56 | 100 | |
| 3/8 | Φ 9.0/4.50 | ≥ 9.30 | ≤ 4.50 | ≥ 0.56 | 100 |
| Φ 10/5.00 | ≥ 10.3 | ≤ 5.00 | ≥ 0.56 | 100 | |
| Φ 11/5.50 | ≥ 11.3 | ≤ 5.50 | ≥ 0.56 | 100 | |
| 1/2 | Φ 12/6.00 | ≥ 12.3 | ≤ 6.00 | ≥ 0.56 | 100 |
| Φ 13/6.50 | ≥ 13.4 | ≤ 6.50 | ≥ 0.69 | 100 | |
| Φ 14/7.00 | ≥ 14.4 | ≤ 7.00 | ≥ 0.69 | 100 | |
| Φ 15/7.50 | ≥ 15.5 | ≤ 7.50 | ≥ 0.69 | 100 | |
| Φ 16/8.00 | ≥ 16.5 | ≤ 8.00 | ≥ 0.69 | 100 | |
| Φ 17/8.50 | ≥ 17.5 | ≤ 8.50 | ≥ 0.69 | 100 | |
| 3/4 | Φ 18/9.00 | ≥ 18.9 | ≤ 9.00 | ≥ 0.69 | 100 |
| Φ 20/10.0 | ≥ 21.5 | ≤ 10.0 | ≥ 0.77 | 100 | |
| Φ 22/11.0 | ≥ 23.4 | ≤ 11.0 | ≥ 0.77 | 100 | |
| 1 | Φ 25/12.5 | ≥ 25.6 | ≤ 12.5 | ≥ 0.77 | 50 |
| 1-1/4 | Φ 28/14.0 | ≥ 29.0 | ≤ 14.0 | ≥ 0.87 | 50 |
| Φ 30/15.0 | ≥ 31.5 | ≤ 15.0 | ≥ 0.87 | 50 | |
| Φ 35/17.5 | ≥ 36.5 | ≤ 17.5 | ≥ 0.87 | 50 | |
| 1-1/2 | Φ 40/20.0 | ≥ 41.5 | ≤ 20.0 | ≥ 0.87 | 50 |
| 2 | Φ 50/25.0 | ≥ 51.5 | ≤ 25.0 | ≥ 0.97 | 25 |
| Φ 60/30.0 | ≥ 60.0 | ≤ 30.0 | ≥ 1.07 | 50 | |
| Φ 80/40.0 | ≥ 80.0 | ≤ 40.0 | ≥ 1.17 | 50 | |
| 3 | Φ 70/35.0 | ≥ 70.0 | ≤ 35.0 | ≥ 1.17 | 50 |
| 4 | Φ 100/50.0 | ≥ 100.0 | ≤ 50.0 | ≥ 1.17 | 50 |
| 5 | Φ 120/60.0 | ≥ 120.0 | ≤ 60.0 | ≥ 1.17 | 50 |
| 6 | Φ 150/70.0 | ≥ 150.0 | ≤ 70.0 | ≥ 1.17 | 50 |
Regulatory Compliance | Certifications
| RoHs | Compliant |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |